BROWSE
BROWSE Product Category
RS232 TO RS485 CONVERTERS
RS232 TO RS422 CONVERTERS
RS485 TO RS422 CONVERTERS
SERIAL TO TTL CONVERTERS
USB to SERIAL ADAPTERS
ISOLATORS & SUPPRESSORS
SERIAL DATA REPEATERS
FIBER OPTIC CONVERTERS
ETHERNET TO SERIAL CONVERTERS
ACCESSORIES
- General Info
- Specifications
- Pinouts
- Images
- Troubleshooting
- Applications
DESCRIPTION
The SerialComm ISO-ETH-P is a bi-directional passive industrial (wide temperature range) Ethernet surge arrestor. It can protect any standard 10Base-T/100Base-TX Ethernet port from transients, peaks, and spikes caused by lightning and other power surges. The unit is passive, therefore, no external power or flow control is required. The ISO-ETH-P is designed with top quality high response surge arresters, The low capacitance protection provides a clamping voltage with low loss against the high speed signal. The ISO-ETH-P is designed to protect data communication lines in local and wide area networks up to 100Base-T transmission speeds. The ISO-ETH-P has a RJ45 on one Ethernet side and an another RJ45 on the other Ethernet side.
INDUSTRIAL 10M / 100M ETHERNET SURGE PROTECTOR
30-day Money Back Guarantee / 5-year Replacement Warranty
SerialComm Model: ISO-ETH-P
FEATURES
- High quality surge protector meeting IE61000-4-5 and ITU-TK20&K21 standards
- Heavy-duty steel case
- Passive: no need for external power
- Plug-and-Play (Device is hot pluggable)
- RJ45 connections for easy installation
- Clamping Voltage at 6.8V
- 600W of surge protection from electrical surges and lightning strikes
- MTBF(Mean Time Before Failure): 324,705 Hours
- 5-year manufacturer's warranty
- CE, FCC, and RoHS Compliance Certified
| COMMUNICATION | |
| STANDARDS: | 10Base-T/100Base-TX Standard, IEC61000-4-5 and ITU-TK20&K21 Standards |
| BAUD RATES: | Up to 100 Mbps |
| CONNECTOR TYPES: | RJ45 Female Connectors |
| ELECTRICAL | |
| POWER SOURCE: | Passive Device: No Power Needed |
| WORKING VOLTAGE: | 0 Volts to 5 Volts |
| VOLTAGE CLAMP: | 6.8V |
| VOLTAGE LIMIT: | 40 Volts |
| INSERT CONSUMPTION: | <0.5 db |
| Delay Time: | < 1ns |
| MECHANICAL | |
| HOUSING: | Heavy Duty Steel Casing |
| WEIGHT: | 0.35oz (10 grams) |
| DIMENSIONS: | 3.31 X 1.02 X 1.02 in (84.0 X 25.8 X 25.8 mm) |
| ENVIRONMENTAL | |
| OPERATING TEMP.: | -40ºF to 185ºF (-40ºC to 85ºC) |
| STORAGE TEMP.: | -40ºF to 185ºF (-40ºC to 85ºC) |
| OPERATING HUMIDITY: | 5% To 95% - No Condensation |
| QUALITY | |
| PRODUCT SAFETY: | CE, FCC, RoHS 3, and REACH certified |
| QUALITY MANAGEMENT: | Manufactured and Distributed to ISO 9001:2015 QMS |
| MEAN TIME BEFORE FAILURE: | 324,705 Hours |
| RELIABILITY: | Low Failure Rate - 99+% Reliability Since Inception |
| WARRANTY: | 5-year Replacement Warranty |
RJ-45 CONNECTIONS
PROTECTED LINES (1,2,3,6)
| SIGNAL | TX+ | TX- | RX+ | N/C | N/C | RX- | N/C | N/C |
| PIN # | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| FUNCTION | TX+ | TX- | RX+ | N/C | N/C | RX- | N/C | N/C |
Connect ISO-ETH-P to working 10/100M Ethernet connection. If there is continuity in the data stream then it is working.
Download FREE FULL VERSION AccessPort Advanced Serial Monitor, Simulation and Data Analysis Software Tool. This software tool is great for testing converters. Supports Windows 98/XP/VISTA/WIN 7/WIN 8/WIN 10. DOWNLOAD SOFTWARE AND USER MANUAL
FUNCTIONAL DIAGRAM
FIGURE 1: 600W RJ45 SURGE PROTECTOR FUNCTIONAL DIAGRAM
APPLICATIONS
FIGURE 2: 600W RJ45 SURGE ARRESTOR APPLICATION
DIMENSIONS
